High Gates BR3
A high gate intended for traffic control, to be used in guarded areas of a strict access control level. It has a processor system, comb motion support, two-way mechanism, diode pictograms, emergency unlocking.
 |
 |
 |
 |
 |
| BR3-1-3 | BR3-1-4 | BR3-2-3 | BR3-2-4 | BR3-1-S |
 |
||||
| BR3-2-S | ||||
 |
||||
High gate: BR3-1-3
PURPOSE
A high gate intended for traffic control, to be used
in guarded areas of a strict access control level. It has
a processor system, comb motion support, two-way
mechanism, diode pictograms, emergency unlocking. The
frame and the rotor are made of stainless steel or powder
painted steel.
CASING
The rotor is made of 1.4301 (EN 10088) ground
stainless steel or S235JR powder painted steel
(EN10025:1996). The frame is optionally made of: stainless
steel / zinc plated steel / powder painted steel. The access
to the gate internal mechanism is secured with a keyoperated
lock. Fastened to the floor with anchors, e.g.
glued ones.
WAY OF OPERATION
The two-way mechanism enables traffic control in
both directions or in a selected direction. The diode
pictograms, situated on the gate frame, indicate the gate
locked/unlocked status.
The red cross indicates the passage closure, the
green arrow indicates the passage opening.
The electromechanical power motion of the arms
facilitates smooth passing (traffic) and supports the
automatic locking of the arm system.
CONTROL SYSTEM
After the processor system receives a signal from
an external device (free of potential), it takes over
a overall control of the system, i.e. enabling and disabling
the arm motion, and sends the feedback signal after the
transfer cycle is completed.
- download catalogue card
- download(Password protected)
- download(Password protected)
|
| Contact form: |
| If you have any questions regarding our products fell free to contact us:: |