Turnstiles BR2
Low gate for controlling pedestrian traffic in guarded areas. The device is intended for facilities with high quality finishing.
 |
 |
 |
 |
| BR2-T | BR2-TM | BR2-N2 | BR2-STI |
 |
|||
Turnstile: BR2-TM
PURPOSE
Low gate for controlling pedestrian traffic in
guarded areas.
The device is intended for facilities with high
quality finishing.
CASING
The casing is made of 1.4301 (EN 10088) ground
stainless steel. The access to the inner systems of the gate
is secured with a key operated lock. Fastened to the floor
with anchors, e.g. glued ones.
WAY OF OPERATION
The two-way system allows for controlling the
pedestrian traffic in both directions or one, selected
direction. Diode pictograms placed on the gate cover
determine the locked/unlocked status of the gate. The red
cross - gate closed, green - arrow - gate open.
The electromechanical power motion of the arms
makes passing (traffic) easy and supports the automatic
locking of the arm system.
CONTROL SYSTEM
After the processor system receives a signal (free
of potential) from an external device, it takes over an
overall control of the system, i.e. enabling and disabling the
motion of arms, and sends the feedback signal after the
transfer cycle.
The control system is prepared to work with access
control systems.
- download catalogue card
- download(Password protected)
- download(Password protected)
|
| Contact form: |
| If you have any questions regarding our products fell free to contact us:: |